[01]From £60
Maintenance wash
Two-bucket hand wash, wheels and arches, glass, and an interior hoover and wipe-down.
Paint you can see yourself in
Bristol · Since 2014Feeder Road, Bristol
Hand washes, machine paint correction and ceramic coatings from a lit, heated unit off Feeder Road. One car at a time.
- Turnaround1 to 3 days
- CoatingsCeramic and PPF
- The bayHeated and lit
Google rating4.9
Google reviews312
Detailing since2014
Coating warranty5 years
How we work
Every car is washed by hand, decontaminated, corrected and sealed before it leaves.
No drive-through brushes and no rushed jobs. A full correction takes two days, because that is how long it takes to do properly.
The unit
A clean, lit, heated bay, so nothing gets rushed
We work from our own unit with proper lighting, filtered water and a heated floor, so coatings cure the way the maker intends.
Wait with a coffee for a wash, or drop the car off for anything longer and we will send you photos as it goes.
- ProductsGtechniq and Gyeon
- BookingBy appointment
- CollectionWithin 10 miles
- PaymentCard or transfer
Services
Pick a level of finish
Every price includes a hand wash and an inspection under lights first, so you know what you are paying for.
[02]From £280
Enhancement polish
A single-stage machine polish that lifts light swirls and brings the gloss back, sealed with a spray coating.
[03]From £550
Paint correction
Multi-stage correction, panel by panel, taking out swirls, holograms and light scratches.
[04]From £750
Ceramic coating
A hard ceramic layer applied after correction, with a five-year warranty and a yearly check-up.
[05]From £1,200
Paint protection film
Self-healing film on the front end, mirrors and sills, cut to your car.
Recent work
Out of the bay this month
01Snow foam pre-washBentley Continental GT
02Machine correctionBlack paint, two stages
03Hand washDoor shuts and handles
04Interior detailLeather cleaned and fed
Inside and out
Paint and cabin, both done properly
Booking
How a detail runs
From the first look to handing back the keys, usually one to three days.
- 01
Inspection under lights
We go round the car with you and a paint depth gauge, and agree what can and cannot come out.
- 02
Wash and decontaminate
Snow foam, hand wash, iron fallout remover and clay, so the polish only meets clean paint.
- 03
Correct
Machine polishing, panel by panel, checked under different lights as we go.
- 04
Protect
Coating, sealant or film, left to cure in the heated bay overnight.
- 05
Handover
We walk you round it in daylight and explain the aftercare. Photos of every stage come with it.
Who does it
Two people, and they both touch your car
No subcontractors and no trainees on your paint. Dan started in a Bristol body shop; Priya ran interiors for a dealer group before joining.
- Dan HaleCorrection and coating
- Priya ShahInteriors and film
From a customer
Dropped the car off with swirls you could see from across the road. Picked it up looking better than the day I bought it, and they sent photos all the way through.
James R.Audi RS4, full correction
Before you book
Good questions
How long will you need the car?
A wash is about two hours. Enhancement is a day. Full correction and coating is two to three days, because the coating needs to cure.
Can you come to me?
Washes and interiors, yes, within ten miles. Correction and coatings are done in the unit, where the light and temperature are right.
Is a ceramic coating worth it?
If you keep the car more than a couple of years, usually. It makes washing quicker and protects the correction. We will tell you honestly if it is not worth it on your car.
How do I pay?
Card or bank transfer when you collect. Coatings and film need a deposit to book the bay.
Book in
Bring it in. We will take it from there.
Tell us the car and what is bothering you about it. You get a price on the phone and a date that week.
Call0117 496 0321
Find usUnit 7, Feeder Road, Bristol
HoursMon to Sat, 8am to 6pm
CollectionFree within 10 miles